DIY CARPET CLEANER FOR CAR

INTRODUCTION

YOUR EXISTING AD GOES HERE

If you enjoy having a clean and tidy car, then you might think about having it
professionally cleaned at the auto shop once in a while. However, if you’re looking
to save some money and really want to keep your vehicle looking good, then DIY
carpet cleaner for cars can be the best way to go!

YOUR EXISTING AD GOES HERE

Here are some of the best DIY carpet cleaners for your car that are incredibly easy to do at home and save you both time and money. Keep your car interior looking great with the best DIY carpet
cleaner for your car! This simple recipe works wonders on carpet and upholstery alike, leaving your car smelling fresher than ever.!

Hands down, the best way to keep your car looking as good as new is to clean it regularly! Unfortunately, most car owners don’t bother cleaning their vehicle, which ends up leaving it in poor
condition over time and makes it hard to sell.

To help you keep your car looking its best without taking up too much of your time, we’ve compiled an easy-to-follow guide on the best DIY carpet cleaner for your car that takes just minutes to
complete. Before you know it, you’ll be able to show off your spotless vehicle to anyone who will listen! See how easy it is to make your own carpet cleaner for your car in this step-by-step guide.

WHAT YOU NEED

Photo by Tim Mossholder on Unsplash

To make this carpet cleaner, you will need: 1/2 cup of baking soda, 1/4 cup of
white vinegar, 1 cup of warm water, and a spray bottle. Mix the baking soda and
vinegar together in a bowl, then slowly add the water until it forms a paste.

Pour the mixture into the spray bottle and shake well. To use, simply spray on the
affected area and scrub with a brush or sponge. Rinse with clean water and vacuum
the area to remove any residual cleaner. There are many benefits to using a
homemade carpet cleaner instead of store-bought cleaners.

One is that they are much cheaper, because most people already have these ingredients lying around
their house and don’t have to purchase anything else (depending on what you
already have). Another benefit is that they’re more environmentally friendly than
store-bought cleaners, which often contain harsh chemicals.

And lastly, they are customizable based on your needs – if you want something stronger, just add some additional baking soda or vinegar. Here’s another recipe that’s easy to make and has
multiple uses! You’ll need: 2 cups of distilled white vinegar, 3 tablespoons of
baking soda, 3 tablespoons dish soap, and 1 gallon of hot water.

Add all ingredients to the spray bottle and mix well. You can either mix one part vinegar to two parts
hot water or two parts dish soap per gallon of hot water depending on how strong
you want the solution to be. Vinegar is an acid so be careful not to get it too close
to delicate fabrics like silk. It also works as a disinfectant!

HOW IT WORKS

There’s nothing quite like a clean car – and carpet cleaner can help you get your car
looking its best. But why spend money on a commercial cleaner when you can
make your own at home? This DIY carpet cleaner is simple to make and works just
as well as the store-bought variety. Plus, it’s much cheaper! Here’s how to do it:

  • Fill up a bucket with water. The warmer the water, the better it will work.
  • Add about 1/4 cup of dish soap or laundry detergent.Choose either one ,depending on what type of grime you’re trying to remove from your carpeting (dish soap is better for grease).
  • Mix thoroughly until there are no bubbles left in the mixture.
  • Put in small squirts of hand dishwashing liquid if needed and mix again until fully combined. Pour into spray bottle and start cleaning!
  • To avoid getting any stains on your clothes, wear an old t-shirt that you don’t mind getting dirty.
  • For extra stain removal power, use pre-treatment products that are available at most automotive stores.
  • Once you’ve finished cleaning your carpets, rinse them out using clear water and allow them to dry completely before driving off.
  • You may need to repeat this process more than once for tough stains or dirt.
  • When finished, rinse off all of the soapy residue with clean water.
  • Let air dry before driving off and enjoy your new carpets!

HOW TO MAKE IT

Assuming you have all the necessary materials, making your own carpet
cleaner is actually quite simple. Just mix 1/4 cup of white vinegar with 1/4
cup of water in a bowl or container. Then, add 1 tablespoon of dish soap and
mix well. Pour the mixture into a spray bottle and apply it to the affected
areas of your car’s carpets or upholstery.

Let it sit for a few minutes before scrubbing with a brush or cloth. Finally, vacuum up the area to remove any remaining dirt or residue. You can also use this solution on your seats, as long as they are made from fabric that can withstand the heat and moisture.
Be sure to test an inconspicuous area first just to be safe!

TIPS AND FAQ

Assuming you have all the necessary supplies, the first step is to vacuum your car’s
carpets. Next, mix together a cleaning solution of one part water and one part
vinegar. You can then use a clean cloth or sponge to apply the solution to the
affected areas. Once you’ve scrubbed the area, blot it dry with a towel. Finally, let
the area air dry completely before putting anything back in your car.
If you have any lingering smells, try sprinkling baking soda on the affected area
and letting it sit overnight before vacuuming it up in the morning.
If you have any tough stains that seem impossible to remove, you can try making a
paste of baking soda and water and rubbing it into the stain with a toothbrush.

YOUR EXISTING AD GOES HERE
>